How to use the cube

How to charge

The cube can be charged by placing it on the console charger or the charger for toio Core Cube. For detailed instructions and how to check the remaining battery level of the cube, please refer to the manuals.

How to power on and off

There is a power button on the bottom of the cube. Press the power button to turn on the cube. Pressing and holding the power button turns it off.

Auto power off function

Communication with the cube is done via Bluetooth Low Energy (BLE). If the cube is not connected to any other device via BLE for 15 minutes, it will automatically turn off. An audible alert will also sound every 3 minutes while the cube is not connected to another device via BLE.

For more information on communication with the cube, please see Communication Overview - Communication with the cube.

System state

The state of the cube's system is notified through colors of the indicator and sound alerts. The different states are as follows.

cube state	Indicator	Audible alert
Startup	Flashes once in red, blue, green, then white	○ With audible alert
Connecting	Flashes in blue	No audible alert
Connected	Indicator turns off	○ With audible alert
Disconnected	Indicator turns off	○ With audible alert
Shutdown	Indicator turns off	○ With audible alert

Checking the remaining battery level

When the power button is pressed while the cube is on, the approximate remaining battery level is indicated through the color of the indicator and audible alerts. The remaining battery level and the corresponding condition of the indicator are shown below. Audible alerts are sounded as the indicator flashes.

Remaining battery level	Indicator	Audible alert
Battery level is sufficient	Flashes in green three times	Sounds three times as the indicator flashes
Battery level is low	Flashes in yellow twice	Sounds twice as the indicator flashes
Almost no battery left	Flashes in red once	Sounds once with each flash of the indicator